Tutorial "Ready To Fight"

This tutorial was written by me on 28th March 2012. It was done with PSP X2 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Ready To Fight" Tagger Size PTU kit by Inzpired Creationz which you can purchase at ScrapsAndTheCity, a matching tube, I am using the adorable artwork of SkyScrapsDesigns which you can purchase at SATC too, template by Dees'SignDepot HERE, fonts Impact and BankGothic Md BT and filters Penta.com Jeans and L enK LenKSiteofWonders - Zitah

1. Open template in PSP, with Shift D make a copy, close the original, delete layers info, glitter cupcake, bottom wa, bottom white wa, bottom wa ds, life isn't fuckinf easy and LIFE, highlight top white squares, draw an exact rectangular selection around the last (fourth) one of the squares, promote selection to layer, select none, effects, image effects, offset 89/0, do the same with the last black dot, merge dot down, highlight the one square, merge down (with the other squares), duplicate layer, image mirror, image flip, delete layer bottom white squares, now highlight the upper five squares, effects, image effects, offset -30/0, do the same with the dots and the grey strip, highlight the lower five squares, offset 30/0

2. Activate font, Impact Size 80, create as Vector, type READY (capital letters only) but leave some space between the letters, convert to rasterlayer, fit it into the upper white squares, do the same with the word FIGHT and fit it into the lower white squares, with font BankGothic Size 30 type READY TO FIGHT and place it into the grey strip

3. Highlight bottom striped circle, merge down (with top striped circle), select all, selection float, selection defloat, delete layer, open Paper 14, copy and paste as new layer, selection invert, press delete, selection invert, filter, Penta.com Jeans 25/3, select none, add Dropshadow 1/1/25/2 #000000, repeat with -1/-1, highlight top white squares, merge down (with copy of bottom white squares), select all, selection float, selection defloat, delete layer, paste same papers as before as new layer again, selection invert, press delete, select none, adjust, add noise, noise 25, Random and Monochrome checked, add Dropshadow

4. Highlight top black circle, select all, selection float, selection defloat, delete layer, add new rasterlayer, open Paper 2, set to pattern (Angle 0/Scale 50), fill selection with pattern, select none, add Drophshadow -1/-1/25/2 #000000, highlight bottom black circle, select all, selection float, selection defloat, delete layer, add new rasterlayer, fill with pattern, select none, add Dropshadow 1/1/25/2 #000000

5. Highlight white square, select all, selection float, selection defloat, delete layer, open Paper 7, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow 1/1, highlight white oval frame, select all, selection float, selection defloat, delete layer, paste pink paper as new layer again, selection invert, press delete, select none, adjust, add noise, noise 50, Uniform and Monochrome checked, select none, add Dropshadow 1/1, highlight grey strip, select all, selection float, selection defloat, delete layer, paste pink paper as new layer again, selection invert, press delete, select none, adjust, add noise, noise 25, Random and Uniform checked, add Dropshadow 1/1, highlight small grey circle, select all, selection float, selection defloat, delete layer, paste pink paper as new layer again, selection invert, press delete, selection invert, filter, Penta.com Jeans, select none, add Dropshadow 1/1/25/2 #000000, repeat with -1/-1

6. Highlight bottom grey strip, select all, selection float, selection defloat, delete layer, open Paper 8, copy and paste as new layer, selection invert, press delete, selection invert, filter, Penta.com Jeans, select none, add Dropshadow 1/1, highlight grey oval, select all, selection float, selection defloat, delete layer, open Paper 10, resize 600px, copy and paste as new layer, selection invert, press delete, selection invert, selection, modify, contract 13px, open Paper 1, resize 600px, copy and paste as new layer, selection invert, press delete, select none, highlight blue paper layer, add Dropshadow

7. Merge layers READY and FIGHT, select all, selection float, selection defloat, delete layer, copy Paper 7, paste as new layer, selection invert, press delete, selection invert, filter, Penta.com Jeans, selection, modify, expand 2px, add new rasterlayer, fill with white, arrange layer, move down, select none, add Dropshadow, highlight dots, select all, selection float, selection defloat, delete layer, open Paper 8, copy and paste as new layer, selection invert, press delete, selection invert, selection, modify, expand 2px, add new rasterlayer, fill with white, select none, arrange layer, move down, add Dropshadow, highlight the small words READY TO FIGHT, select all, selection float, selection defloat, delete layer, open Paper 14, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow

8. Highlight large square, select all, selection float, selection defloat, delete layer, paste Paper 14 as new layer again, selection invert, press delete, open tube, copy and paste as new layer two times, fit into selection as you wish, press delete on both tube layers, select none, merge both tube layers, draw a big rectangular selection around this layer, selection invert, press delete, select none, set blend mode to Luminance (L), duplicate tube layer, set blend mode to Screen, Adjust - Blur, Gaussian Blur 3, set opacity of top tube layer to 75, highlight tube layer above the blue paper, merge down, highlight top tube layer, merge down, filter, LenKSiteofWonders Zitah, standart settings, add Dropshadow

9. Open Halftone, copy and paste as new layer, arrange layer, send to bottom, add Dropshadow, highlight the layer where we used LenKsiteofwonders of, open Sparkle 3, copy and paste as new layer, open Skull 4, resize 30%, copy and paste as new layer, move it up to the left, add Dropshadow, duplicate layer, move it down to the right, open Ribbon 1, resize 50%, copy and paste as new layer, image flip, move it up to the right, duplicate layer, image mirror, image flip, merge down, add Dropshadow

10. Highlight top layer, open Cuffs 1, resize 50%, copy and paste as new layer, image mirror, image flip, move it up to the left, add Dropshadow, open T-Shirt, resize 70%, copy and paste as new layer, free rotate 10 degrees left, move it down to the left, add Dropshadow, arrange it below the white FIGHT layer, open Shoe 1, resize 40%, copy and paste as new layer, image mirror, move down to the left, add Dropshadow

11. Open your tube now, resize 600px height, copy and paste as new layer, image mirror, move it to the right, duplicate layer, set blend mode of the upper one to Screen, adjust, blur, gaussian blur 3, opacity to 75, merge down, arrange tube layer below the white font layers

You can write down your name and/or text now, add copyright information and save your tag as .png or .jpg! Hope you like my tut, please enjoy ♥

Tutorial "Fairly Irish"

This tutorial was written by me on 13th March 2012. It was done with PSP X2 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Fairly Irish" Tagger Size PTU kit by SleekNSassyDesignz which you can purchase at TwilightScraps, an adorable irish fairy tube plus Close-Up, I am using the fantastic artwork of Anna Fesenko which you can purchase at PicsForDesign, mask lucky mask by Vicky HERE and filter Penta.com Jeans

1. Open mask in PSP, open a new transparent canvas 700x700px, fill with #62dde2, layers, new masklayer, from image, load lucky mask, source luminance checked, merge group, filters, Penta.com Jeans 20/4, close mask

2. Open FI_Element30.png, resize 500px, copy and paste as new layer, add Dropshadow 4/4/40/7 #000000, open FI_Element2.png, resize 50% (resize all layers checked), selection, custom selection, Top 66/Left 0/Bottom 325/Right 265, copy, paste as new layer onto your tag, select none at your frame, close without saving, back to your tag, move the part of the frame down to the left (Position x 93/Position y 363), duplicate layer, image flip, now move the top one down until the borders are exactly together, merge down, duplicate, image mirror, merge down, press Strg X, Strg L, so the frame is exactly in the middle of the tag, arrange below the blue frame, add Dropshadow

3. Selection tool, custom selection, Top 120/Left 120/Bottom 580/Right 580, open FI_Paper10.jpg, copy and paste as new layer, selection invert, press delete, don't deselect, arrange layer below the white frame, open your close-up/anyway with my tube I did not use the close up because the tube is large too, maybe you have to resize (I resized mine 75%), image mirror, copy and paste as new layer, fit into selection as you like, press delete, select none, on the tube layer draw a big rectangular selection, selection invert, press delete, select none, duplicate blue paper layer, make the lower one invisible, highlight tube layer, set blend mode to Luminance (L), merge down (with top blue paper layer), duplicate this layer, adjust, gaussian blur 5, blend mode to Screen, merge down, make the blue paper layer visible again, arrange it above the layer with the tube, set blend mode to Hard Light, opacity to 65

4. Highlight top layer, open FI_Element29.png, resize 50%, copy and paste as new layer, move it up to the left, add Dropshadow, open FI_Element7.png, resize 40%, copy and paste as new layer, add Dropshadow, open FI_Element5.png, resize 35%, copy and paste as new layer, add Dropshadow, merge down (with the other flower), move it up to the left

5. Open FI_Element26.png, resize 70%, copy and paste as new layer, move it up to the right corner of the frame, add Dropshadow, open FI_Element53.png, resize 40%, copy and paste as new layer, move it down to the left, add Dropshadow, open FI_Element14.png, resize 35%, copy and paste as new layer, move it down to the left, place it right to the dwarf, arrange layer below the dwarf, add Dropshadow, open FI_Element28.png, resize 50%, copy and paste as new layer, move it down to the left, place it right to the pot, arrange layer below the pot layer, add Dropshadow

6. Highlight top layer, open tube now, if you are using the same than I you need to resize 23%, copy and paste as new layer, place it on the right side, add Dropshadow, open FI_Element23.png, resize 35%, copy and paste as new layer, move it down to the right, place it on the fairy's foot, add Dropshadow

You can write down your name and/or text now, add copyright information and save your tag as .png or .jpg! Hope you like my tag, please enjoy ♥

Tutorial "Irish Girl"

This tutorial was written by me on 12th March 2012. It was done with PSP X2 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Irish Girl" Tagger Size kit by SkyScrapsDesigns which you can purchase at ScrapsAndTheCity, a St. Patrick's Day tube plus Close-Up, I am using the fantastic artwork of Arthur Crowe which you can purchase at Arthur's store here, my Irish Girl template - Download here and filter Penta.com Jeans

1. Open template in PSP, with Shift D make a copy, delete layer ©Info, open SkyScraps-IG-E48.pngSkyScraps-IG-E48.png, resize 700px, copy and paste as new layer, add Dropshadow 1/1/20/3 #000000, arrange layer, send to bottom, open SkyScraps-IG-E55.png, copy and paste as new layer, move it up to the right, take care that it does not go out of the canvas on the top, duplicate layer, image mirror, image flip, merge down, add filter Penta.com Jeans 25/4, arrange layer, send to bottom

2. Highlight layer Elipse, select all, selection float, selection defloat, delete layer, open SkyScraps-IG-pp4.jpg, copy and paste as new layer, selection invert, press delete, selection invert, adjust, add noise, noise 50, Uniform and Monochrome checked, selection, modify, contract 2px, add new rasterlayer, open SkyScraps-IG-pp5.jpg, set to pattern (Angle 0/Scale 50), fill selection with pattern, selection invert, highlight layer ThinRec, press delete, select none, add Dropshadow to the white Elipse layer

3. Highlight RightCircle, merge down (with LeftCircle), select all, selection float, selection defloat, delete layer, add new rasterlayer, paper SkyScraps-IG-pp5.jpg is still open, with your crop tool crop a little yellow peace from a clover, effects, image effects, seamless tiling, corner, linear and bidirectional checked, 0/0/100, set to pattern (Angle 0/Scale 100), fill selection with pattern, select none, add Dropshadow

4. Highlight RightClover, merge down (with LeftClover), select all, selection float, selection defloat, open SkyScraps-IG-pp6.jpg, resize 300px, copy and paste as new layer, move it up into the left selection, promote selection to layer, move small paper into the right selection now, promote selection to layer, select none, remove the small paper, merge both clovers, add Dropshadow

5. Highlight Rectangle, select all, selection float, selection defloat, delete layer, add new rasterlayer, fill with the yellow pattern we used before, open your tube and close-up now, copy and paste as new layer (3 times), fit into selection as you like, selection invert, press delete on every tube layer, select none, merge tube layers, tube layer is active, draw a big rectangular selection around it, selection invert, press delete, select none, set blend mode of tube layer to Luminance (L), duplicate tube layer, adjust, blur, gaussian blur 2, blend mode to Screen, opacity to 75, duplicate the yellow paper layer, make the lower one invisible, highlight lower tube layer, merge down, highlight upper tube layer, merge down, set the opacity to 75, make the paper layer visible again and highlight it, select all, selection float, selection defloat, highlight raster2 (the green dots), promote selection to layer, select none, arrange this layer above the tube layer, adjust, hue/saturation 0/0, blend mode to overlay, opacity to 75

6. Highlight ThinRec, select all, selection float, selection defloat, delete layer, open SkyScraps-IG-pp1.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow, highlight IrishGirl, select all, selection float, selection defloat, delete layer, add new rasterlayer, fill selection with the yellow pattern, select none, add noise, add Dropshadow

7. Open SkyScraps-IG-E44.png, resize 55%, copy and paste as new layer, free rotate 25% right, move it to the right and a little down, add Dropshadow, with your selection tool select the parts over ThinRec, promote selection to layer, on original star press delete, select none, arrange promoted parts below ThinRec

8. Highlight top layer, open SkyScraps-IG-E25.png, resize 35%, copy and paste as new layer, move it up to the left onto the clover, duplicate layer, image mirror, move it down onto the clover, add Dropshadow to both, open SkyScraps-IG-E42.png, resize 65%, copy and paste as new layer, move it to the right and a little down, add Dropshadow

9. Open SkyScraps-IG-E31.png, resize 30%, copy and paste as new layer, image mirror, image flip, move it down to the left, add Dropshadow, open SkyScraps-IG-E21.png, resize 35%, copy and paste as new layer, move it down to the left, on to the right side of the hat, add Dropshadow, open SkyScraps-IG-E34.png, resize 30%, copy and paste as new layer, free rotate 90 degrees right, move it down to the left, add Dropshadow, open SkyScraps-IG-E19.png, resize 15%, copy and paste as new layer, move down, add Dropshadow, open SkyScraps-IG-E32.png, resize 40%, copy and paste as new layer, move it to the left and a little down, arrange this layer below the hat, add Dropshadow

10. Open your tube, copy and paste as new layer, resize if needed, place as you wish, duplicate layer, on the top layer, adjust, blur, gaussian blur 2, blend mode to screen, opacity to 75, merge down

You can write down your name and/or text now, add copyright information and save your tag as .png or .jpg! Hope you like my tut, please enjoy!

Tutorial "City Style"

This tutorial was written by me on 16th February 2012. It was done with PSP X2 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Citylicious" Tagger Size kit by SkyScrapsDesigns which you can purchase at ScrapsAndTheCity, a girly tube, I am using one by SkyScrapsDesigns, too you can also purchase at SATC and Vix_Mask147 here

1. Open mask in PSP, open a new transparent canvas 700x700px, fill canvas with #c70463, layers, new masklayer, from imagek, load Vix_Mask147, source luminance checked, merge group, open SkyScraps-Cytilicious-e51.png, resize 550px, copy and paste as new layer, open SkyScraps-Cytilicious-e46.png, resize 600px, copy and paste as new layer, effects, image effects, offset 0/-20

2. Highlight Pink Frame, with magic wand tool click into it, selection, modify, expand 3px, selection invert, highlight black net, press delete, arrange layer below the pink frame, invert selection again, highlight mask layer, add new rasterlayer, open SkyScraps-Cytilicious-pp5.jpg, set to pattern (Angle 90/Scale 50), fill selection with pattern, select none, add Dropshadow 1/1/50/2 #000000 to pink frame and black net

3. Open SkyScraps-Cytilicious-e40.png, copy and paste as new layer, move it to the left and a little down, duplicate layer, move it up to the right, merge down, add Dropshadow, place this layer above the mask layer

4. Highlight top layer, open SkyScraps-Cytilicious-e64.png, resize 40%, copy and paste as new layer, free rotate 40 degrees left, move it up to the left, duplicate layer, image mirror, move it down, merge down, add Dropshadow

5. Open SkyScraps-Cytilicious-e57.png, resize 50%, copy and paste as new layer, move it up to the right, add Dropshadow, open SkyScraps-Cytilicious-e15.png, resize 55%, copy and paste as new layer, move it down to the left, add Dropshadow, open SkyScraps-Cytilicious-e14.png, resize 65%, copy and paste as new layer, free rotate 40 degrees left, move it down to the left, add Dropshadow, open SkyScraps-Cytilicious-e23.png, resize 50%, copy and paste as new layer, free rotate 15 degrees left, move it down to the left, add Dropshadow

6. Open your tube, copy and paste as new layer, resize if needed, place as you wish, add Dropshadow

Now you can write down your name and/or text, add copyright information and save your tag as .png or .jpg! Hope you like my tut, please enjoy ♥

Tutorial "Cherry Honey"

This tutorial was written by me on 13th February 2012. It was done with PSP X2 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Cherry Honey" PTU Scrapkit by Addictive Pleasures which you can purchase at Dreams-N-Digital and a cherrilicious tube, I am using the adorable artwork of Elias Chatzoudis which you can purchase at PTE

1. Open a new transparent canvas 700x600px, open frame2.png, resize 550px, copy and paste as new layer, with magic wand tool click outside the frame, selection invert, selection, modify, expand 2px, add new rasterlayer, arrange, move down, fill selection with #fdddd6, adjust, add noise, noise 50, Monochrome and Uniform checked, selection, modify, contract 4px, open p4.png, resize 550px, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow 1/1/25/2 #000000 to noise layer and to the frame

2. Highlight background layer, open glitter.png, resize 65%, copy and paste as new layer, effects, image effects, offset -120/0, duplicate layer, image mirror, merge down, add Dropshadow

3. Highlight top layer, open cherryblossom2.png, resize 65%, copy and paste as new layer, move it down to the right side of the frame, duplicate layer, image mirror, image flip, add Dropshadow to both, open bee.png, resize 50%, copy and paste as new layer, move it up, place it onto the branch, add Dropshadow

4. Open stamp.png, resize 50%, copy and paste as new layer, move it up to the right, add Dropshadow, open stamp2.png, resize 35%, copy and paste as new layer, move it down to the left, add Dropshadow, open bow.png, resize 50%, copy and paste as new layer, move it to the left and a little down, add Dropshadow, duplicate layer, move it to the right and a little up

5. Open your tube, copy and paste as new layer, resize if needed! If you are using the same tube than me, resize 90% and place as you wish, add Dropshadow, open textbeads.png, resize 50%, copy and paste as new layer, move down, add Dropshadow

You can write down your name and/or text now, add copyright information and save your tag as .png or .jpg ♥

Tutorial "L.O.V.E."

This tutorial was written by me on 12th January 2012. It was done with PSP X2 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "L.O.V.E." PTU Tagger Size Scrapkit by Tinas Magical Scrap World which you can purchase at Twilight Scraps, a sexy tube plus close up, I am using the gorgeous artwork of Ismael Rac which you can purchase at XeracxStore and Collab Template 15 by Pooker and Denny HERE

1. Open template in PSP, with Shift D make a copy, close the original, delete layer credit info, image resize 700px, resize all layers checked, image - canvas size Width 700px, Height 550px, Placement Center

2. Open TMW_LOVE_SeedBeads2.png, resize 50%, rotate left, copy and paste as new layer, move it up to the left, duplicate layer, image mirror, image flip, merge down, add Dropshadow 1/1/25/2 #000000, arrange layer, send to bottom

3. Highlight blackcircle, select all, selection float, selection defloat, delete layer, add new rasterlayer, open TMW_LOVE_Paper1.jpg, set to pattern (Angle 0/Scale 65), fill selection with pattern, select none, add Dropshadow, repeat all those steps with ltgreycircle, ltpinkcircle1 and greycircle1

4. Highlight drk grey circle2, select all, selection float, selection defloat, delete layer, add new rasterlayer, open TMW_LOVE_Paper5.jpg, set to pattern (Angle 0/Scale 65), fill selection with pattern, select none, add Dropshadow, repeat all those steps with ltpink circle2, black strip, Raster 5 and grey strip

5. Highlight small oval, select all, selection float, selection defloat, delete layer, open TMW_LOVE_Paper11.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow, highlight pinkcircle2, select all, selection float, selection defloat, delete layer, paste paper as new layer again, selection invert, press delete, select none, add Dropshadow, highlight heart, select all, selection float, selection defloat, delete layer, open TMW_LOVE_Paper12.jpg, copy and paste as new layer, selection invert, press delete, select none, adjust, add noise 25, Uniform and Monochrome checked, add Dropshadow

6. Highlight white vertical strip, select all, selection float, selection defloat, delete layer, paste light paper as new layer again, selection invert, press delete, select none, add Dropshadow, highlight Dotted Recatngle, select all, selection float, selection defloat, delete layer, open TMW_LOVE_Paper13.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow

7. Highlight orange vertical strip, select all, selection float, selection defloat, delete layer, add new rasterlayer, open TMW_LOVE_Paper3.jpg, set to pattern (Angle 0/Scale 85), fill selection with pattern, select none, add Dropshadow, repeat step with lt pink rectangle

8. Highlight larger black rectangle, select all, selection float, selection defloat, delete layer, open TMW_LOVE_Paper9.jpg, copy and paste as new layer, move the paper a bit to the left, so the heart is in the center, promote selection to layer, select none, add Dropshadow, highlight small black rectangle, select all, selection float, selection defloat, delete layer, highlight paper layer, select invert, press delete, select none, add Dropshadow

9. Highlight narrow strips, select all, selection float, selection defloat, delete layer, open TMW_LOVE_Paper13.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow, highlight white rounded rectangle, select all, selection float, selection defloat, delete layer, open TMW_LOVE_Paper11.jpg again, copy and paste as new layer, selection invert, press delete, don't deselect, open your close up,copy and paste as new layer, fit into selection as you like, press delete, select none, set blend mode to Luminance (L), duplicate layer, set blend mode to Screen and opacity to 50, highlight lower tube layer, merge down, highlight top tube layer, merge down, add Dropshadow

10. Highlight top layer, open TMW_LOVE_Butterfly1.png, resize 40%, copy and paste as new layer, free rotate 35 degrees right, sharpen, move it up to the left, add Dropshadow, open TMW_LOVE_Banner.png, resize 40%, copy and paste as new layer, move it up to the right, add Dropshadow

11. Open TMW_LOVE_Teddy.png, resize 35%, copy and paste as new layer, move it down to the left, add Dropshadow, open TMW_LOVE_HeartCandle.png, resize 45%, copy and paste as new layer, move it down to the right, add Dropshadow, open TMW_LOVE_Muffin.png, resize 30%, copy and paste as new layer, move it down to the right, place it next to the Candle, add Dropshadow, open TMW_LOVE_Rings.png, resize 15%, copy and paste as new layer, move it down to the right, place it in front of the Muffin and the Candle, add Dropshadow

12. Image, Canvas Size, Width 700px, Height 600px, Placement Up, open your tube, copy and paste as new layer, resize if needed, place as you wish, add Dropshadow 1/1/25/10 #000000, open TMW_LOVE_Sparkle.png, copy and paste as new layer

You can write down your name and/or text now, add copyright information and save your tag as .png or .jpg! Hope you like my tut, please enjoy ♥

Tutorial "Winter Magic"

This tutorial was written by me on 24th November 2011. It was done with PSP X2 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Winter Love" PTU Scrapkit by Designs by Sarah which you can purchase at PimpMyTagsWithScraps, a matching Christmas tube and close up, I am using the adorable artwork of Ismael Rac which you can purchase at XeracX Store, mask Vix_Mask3Christmas2010 by Vix here and filter Richard Rosenman - Scanlines

1. Open mask in PSP, open a new transparent canvas 700x700px, select all, open sb_pmt_winter-love_pp5.jpg, copy and paste into selection, select none, layers, new masklayer, from image, load mask, source luminance checked, merge group, open sb_pmt_winter-love_print 2.png, copy and paste as new layer, add Dropshadow 1/1/35/4 #000000, Shadow on new layer checked, highlight winter-love_print layer, select all, selection float, selection defloat, highlight Dropshadow layer, press delete 3x, select none, highlight layer above Dropshadow layer again, merge down

2. Open sb_pmt_winter-love_snow.png, resize 95%, copy and paste as new layer, image mirror, image flip, move it up (Position x 25/Position y 35), duplicate layer, image flip, merge down, open sb_pmt_winter-love_frame 1.png, resize 625px, copy and paste as new layer, add Dropshadow, Shadow on new layer not checked

3. Selection, custom selection, Top 120/Left 120/Bottom 580/Right 580, highlight layer below the frame, open sb_pmt_winter-love_pp6.jpg, copy and paste as new layer, selection invert, press delete, open sb_pmt_winter-love_pp10.jpg, copy and paste as new layer, press delete, selection invert, selection, modify, contract 45px, on the red paper press delete, select none

4. Selection, custom selection, Top 120/Left 316/Bottom 580/Right 387, paste red paper as new layer again, selection invert, press delete, select none, duplicate layer (red stripe), free rotate 90 degrees right (rotate single layer... checked), merge all the red parts, press Strg X, Strg L, delete the empty layer, add Dropshadow to red paper layer

5. Highlight top layer (frame), with the magic wand tool click into the small frame up left, highlight white paper layer, open your close up, copy and paste as new layer, fit into the selection, selection invert, press delete, select none, duplicate layer, image mirror, move it down into the frame down right, highlight frame again, with the magic wand tool click into the small frame up right, highlight white paper layer, open your tube, copy and paste as new layer, fit into the selection as you like, selection invert, press delete, select none, duplicate layer, image mirror, move it down into the frame down left, merge all the tube layers, duplicate layer, set the blend mode of the top tube layer to screen, merge down, merge down (with the white paper layer), filters, Richard Rosenman - Scanlines 2/1/-25/0/0

6. Highlight top layer, open sb_pmt_winter-love_snowflakes 1.png, copy and paste as new layer, add Dropshadow (Shadow on new layer checked), highlight snowflakes layer again, select all, selection float, selection defloat, highlight shadow layer, press delete 3x, select none, highlight snowflakes layer, merge down

7. Open sb_pmt_winter-love_branch 5.png, resize 65%, copy and paste as new layer, image flip, move it up to the right, duplicate layer, image mirror, merge both branches, add Dropshadow (Shadow on new layer not checked), open sb_pmt_winter-love_pinecone.png, resize 60%, copy and paste as new layer, move it up to the left, duplicate layer, image mirror, merge down, add Dropshadow, open sb_pmt_winter-love_bells.png, resize 40%, copy and paste as new layer, move it up, add Dropshadow, merge bells, pinecones and branches to one element now

8. Open sb_pmt_winter-love_branch 1.png, resize 40%, copy and paste as new layer, image flip, free rotate 90 degrees left, move it down to the right, add Dropshadow, open sb_pmt_winter-love_bird.png, resize 40%, copy and paste as new layer, move it down to the right, place it onto the branch, add Dropshadow

9. Open sb_pmt_winter-love_gem snowflake 2.png, resize 25%, copy and paste as new layer 3x, place them somewhere on your tag, arrange them under the frame layer, add Dropshadow to all snowflakes

10. Highlight top layer again, open your tube, copy and paste as new layer, resize if needed, place as you wish, add Dropshadow

You can write down your name and/or text now, add copyright information and save your tag as .png or .jpg! Hope you like my tut, please enjoy ♥