Tutorial "Doctor, Doctor"

This tutorial was written by me on 24th September 2010. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Doctor, Doctor" Scrapkit by PolkaDotScraps, which you can purchase at Twilight Scraps, WSL_Mask362.jpg by Chelle, Font Jigga Jigga and Effect VM Extravaganza - Transmission

1. Open mask in PSP, open a new transparent canvas 650x650px, flood fill with white, add new rasterlayer, select all, open PDS_DD- paper8.jpg, copy and paste into selection, select none, layers, new masklayer, from image, load WSL_Mask362.jpg, source luminance checked, merge group, Effects, VM Extravaganza, Transmission - Line Width 6/Offset 0/Contrast 40

2. Open PDS_DD- element29.png, resize 50%, copy and paste as new layer, move down to the left (Position x 0/Position y 317), duplicate layer, image mirror, image flip, merge down, add Dropshadow 1/1/30/2 #000000

3. Selection tool, custom selection Top 70/Left 150/Bottom 580/Right 500, open PDS_DD- paper6.jpg, copy and paste as new layer, selection invert, press delete, selection invert, selection, modify, expand 2px, copy paper PDS_DD- paper8.jpg, paste as new layer, selection invert, press delete, selection invert, selection, modify, contact 35px, press delete, select none, add Dropshadow 1/1/30/2 #000000, repeat with -1/-1/30/2 #000000

4. Open PDS_DD- element13.png, resize 50%, copy and paste as new layer, image mirror, move it up to the right corner of the frame, duplicate layer, image mirror, image flip, merge down, add Dropshadow, arrange this layer under the red paper layer

5. Highlight top layer, open PDS_DD- element11.png, resize 35%, copy and paste as new layer, move it to the right, add Dropshadow 1/1/30/2 #000000, open PDS_DD- element27.png, resize 10%, copy and paste as new layer, free rotate 20 degrees right, move it to the right, place it onto the element, add Dropshadow

6. Open PDS_DD- element10.png, resize 50%, copy and paste as new layer, move it up to the right corner of the frame, add Dropshadow, open PDS_DD- element7.png, resize 40%, copy and paste as new layer, free rotate 10 degrees right, move it up to the left corner of the frame, add Dropshadow, open PDS_DD- element14.png, resize 50%, copy and paste as new layer, image mirror, free rotate 60 degrees right, move it up to the left, remove the tip of the needle

7. Now open your font and write your text onto the clipboard, chose different sizes for the words, if you are satisfied, convert to rasterlayer, free rotate 10 degrees right, add Dropshadow, open PDS_DD- element8.png, resize 15%, copy and paste as new layer, free rotate 35 degrees right, place it onto the clipboard too, add Dropshadow

8. Open your tube, copy and paste as new layer, resize if needed, place as you wish, add Dropshadow, open PDS_DD- element2.png, resize 50%, copy and paste as new layer, image mirror, move it down to the left, add Dropshadow

9. With your font write down your name and place it on the lower part of the frame, add copyright information please and save your tag as .png or .jpg! Hope you like the tut, please enjoy!

Tutorial "Happy Mermaid"

This tutorial was written by me on 11th July 2010. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Under the Sea" Scrapkit by PolkaDotScraps, which you can purchase at Twilight Scraps and DBV Mask 113.jpg by Vaybs

1. Open mask in PSP, open a new transparent canvas 700x550px, flood fill with white, open PDS_UTS- paper14.jpg, with ShiftD make a copy, resize copy 50%, layers, new masklayer, from image, load DBV Mask 113.jpg, source lumincance checked, merge group, copy and paste as new layer onto your white canvas, image, free rotate 90 degrees left, move down to the left, duplicate layer, image mirror, image flip, merge down

2. Open PDS_UTS- frame3.png, rotate 90 degrees left, copy and paste as new layer, with magic wand tool click outside, selection invert, selection, modify, contract 10px, copy paper PDS_UTS- paper14.jpg, paste as new layer, arrange paper layer beneath frame layer, selection modify, press delete, select none

3. Duplicate paper layer, arrange, move up (above frame), free rotate 5 degrees left, duplicate frame layer, arrange, bring to top, free rotate 5 degrees left, add Dropshadow 1/1/25/1 #000000 to both frame layers

4. Highlight lower frame, open PDS_UTS- element13.png, copy and paste as new layer, move up to the left, duplicate layer, image mirror, image flip, merge down, add Dropshadow

5. Open PDS_UTS- frame8.png, resize 65%, copy and paste as new layer, move to the left, draw a selection around the lower part of the frame, press delete, select none, duplicate layer, image mirror, image flip, merge down, add Dropshadow6. Highlight top layer, open PDS_UTS- element33.png, resize 50%, copy and paste as new layer, adjust - Hue/Saturation - 137/131, move down to the left, duplicate layer, image mirror, image flip, merge down, add Dropshadow 1/1/25/1 #000000

7. Highlight top layer, open PDS_UTS- element16.png, resize 25%, copy and paste as new layer, move up to the left, duplicate layer, move it a little to the right and a little down, place it as you can see on my tag, duplictate first flower, image mirror, image flip, duplicate second flower, image mirror, image flip, add Dropshadow to all flowers

8. Open PDS_UTS- element9.png, resize 30%, duplicate layer, image mirror, fit both waves together exactly, merge visible, copy and paste as new layer, free rotate 5 degrees left, move the waves a little down to the right, arrange layer beneath upper frame layer, add Dropshadow 2/2/25/1 #000000, repeat with -1/-1/25/1 #0000009. Open PDS_UTS- element25.png, resize 35%, copy and paste as new layer, free rotate 90 degrees left, move it into the left window of the frame, duplicate layer, image mirror, image flip, move it a little up into the right window of the frame, merge down, arrange bubbles layer under the waves layer, blend mode to Luminance (L)

10. Highlight waves layer, open PDS_UTS- element7.png, resize 18%, copy and paste as new layer, move it to the lower right corner of the frame, duplicate layer, image mirror, place it somewhere on the left side of the frame, add Dropshadow to both

11. Open PDS_UTS- element3.png, resize 20%, copy and paste as new layer, free rotate 25 degrees right, place it somewhere on the right side of the frame, add Dropshadow, open PDS_UTS- element5.png, resize 30%, copy and paste as new layer, move it to the left, add Dropshadow, open PDS_UTS- element4.png, resize 25%, copy and paste as new layer, move down a little, add Dropshadow

12. Highlight top layer, open PDS_UTS- element8.png, resize 30%, copy and paste as new layer, move it to the right, place it on the wave, duplicate layer, image mirror, move it back into the frame, place it somewhere on the wave on the left side, add Dropshadow to both

13. Highlight top layer, open PDS_UTS- element1.png, resize 30%, copy and paste as new layer, move down to the right, place it between the white flowers, add Dropshadow, open PDS_UTS- element2.png, resize 25%, copy and paste as new layer, image mirror, move it up to the left, place it between the white flowers, add Dropshadow

14. Open PDS_UTS- element11.png, resize 50%, copy and paste as new layer, free rotate 35 degrees right, move it a little up to the right, add Dropshadow 1/1/25/5 #000000

Now you can write down your name and/or text! If needed, add copyright information and save your tag as .png or .jpg! Hope you enjoyed, please have fun!

Tutorial "Cherry Delicious"

This tutorial was written by me on 27th June 2010. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Delicious" Scrapkit by PolkaDotScraps, which you can purchase at Twilight Scraps, an adorable tube, I am using the artwork of Ismael Rac, you need to purchase his tubes but as the happenings at AMI he isn't selling at the moment, tag template #343 by Divine Intentionz and WSL_Mask364.jpg by Chelle

1. Open mask and template in PSP, with Shift D make a copy of the template, close the original, delete layers cr info, wordart, frame and frame background, image - canvas size - Height 620/Width 597 Placement Center, highlight background layer, make it visible, flood fill with white, add new rasterlayer, select all, open PDS_D- paper1.jpg, copy and paste into selection, select none, layers, new masklayer, from image, load WSL_Mask364.jpg, source lumincance checked, merge group, selection, custom selection - Left 0/Top 299/Right 620/Bottom 597, selection invert, delete, select none, duplicate layer, image mirror, image flip, move duplicated layer one step down, merge down

2. Open PDS_D- element36.png, remove the three pearls on top, resize 50%, copy and paste as new layer, move it up to the right, duplicate layer, image mirror, image flip, merge down, add Dropshadow 1/1/30/3 #000000

3. Highlight glittered circle, select all, selection float, selection defloat, delete layer, open PDS_D- paper15.jpg, copy and paste as new layer, selection invert, press delete, select none, adjust - add noise - Uniform and Monochrome checked, Noise 35, add Dropshadow

4. Highlight large circle, select all, selection float, selection defloat, delete layer, open PDS_D- paper1.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow, open PDS_D- element36.png again, resize 30%, adjust - Hue/Saturation - Colorize 121/141, copy and paste as new layer, effects - Mura's Meister CopiesAdd Dropshadow, highlight pink circle layer, with magic wand tool click outside, highlight bead layer, press delete, select none

5. Highlight small circle1, select all, selection float, selection defloat, delete layer, add new rasterlayer, open PDS_D- paper6.jpg, set to pattern (Angle 0/Scale 30), flood fill selection, select none, add Dropshadow -1/-1/30/3 #000000, highlight small circle2, select all, selection float, selection defloat, delete layer, add new rasterlayer, open PDS_D- paper4.jpg, set to pattern (Angle 0/Scale 30), flood fill selection, select none, add Dropshadow 1/1/30/3 #000000

6. Open PDS_D- frame1.png, resize 40%, copy and paste as new layer, move it up to the left, place it on the turquoise circle, duplicate layer, image mirror, image flip, merge both circle frame layers, add Dropshadow

7. Highlight rectangle2, merge down (with rectangle1), select all, selection float, selection defloat, delete layer, open PDS_D- paper7.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow 1/1/30/3 #000000, repeat with -1/-1/30/3 #000000

8. Open PDS_D- frame2.png, resize 75%, copy and paste as new layer, with magic wand tool click into it, selection, modify, expand 5px, open PDS_D- paper3.jpg, copy and paste as new layer, selection invert, press delete, select none, arrange layer beneath frame layer, highlight frame, add Dropshadow 1/1/30/3 #000000

9. Highlight top layer, open PDS_D- element10.png, resize 40%, copy and paste as new layer, move it to the right and a little down, add Dropshadow, open PDS_D- element2.png, resize 20%, copy and paste as new layer, place it on the right side of the table, add Dropshadow, open PDS_D- element16.png, resize 15%, copy and paste as new layer, place it on the table, open PDS_D- element15.png, resize 15%, copy and paste as new layer, free rotate 55 degrees left, move it down, place it onto the plate, add Dropshadow

10. Open PDS_D- element9.png, resize 30%, copy and paste as new layer, move it up to the right corner of the frame, add Dropshadow, open PDS_D- element32.png, resize 50%, copy and paste as new layer, move up to the right, add Dropshadow, open PDS_D- element33.png, resize 50%, copy and paste as new layer, move up to the right, add Dropshadow

11. Open PDS_D- element26.png, resize 35%, copy and paste as new layer, move it up to the left corner of the frame, add Dropshadow, open PDS_D- element34.png, resize 35%, copy and paste as new layer, move it up to the left, place it onto the cherries, add Dropshadow

12. Open PDS_D- element21.png, resize 20%, copy and paste as new layer, move it up to the left, place it on the bow, add Dropshadow, duplicate layer, move it down to the table

13. Open PDS_D- element13.png, resize 50%, copy and paste as new layer, adjust - Hue/Saturation - Colorize 240/150, place it as you wish

14. Open your tube, copy and paste as new layer, resize if needed, place as you wish, add Dropshadow

You can write down your name and/or text now! Please add copyright information and save your tag as .png or .jpg! Please have fun! Hope you enjoyed!

Tutorial "Girlie Things"

This tutorial was written by me on 13th May 2010. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Girlie Girl" Scrapkit by PolkaDotScraps, which you can purchase at Twilight Scraps, an adorable tube, I am using the artwork of Jose Cano, which you can purchase at MPT and WSL_Mask84.jpg by Chelle

1. Open mask in PSP, open a new transparent canvas 650x650px, flood fill with white, add new rasterlayer, select all, open PDS_Girlie Girl- paper9.jpg, copy and paste into selection, select none, layers - new masklayer - from image, load WSL_Mask84.jpg, source luminance checked, merge group

2. Open PDS_GG- element49.png, resize 600px, copy and paste as new layer, move up (Position x 35/Position y 50), add Dropshadow 2/2/25/2 #000000

3. Open PDS_GG- frame3.png, rotate 90 degrees right, resize 500px, copy and paste as new layer, select all, selection float, selection defloat, add new rasterlayer, open PDS_GG- frame6.png, resize 450px, copy and paste into selection, select none, adjust - sharpen, add Dropshadow to both frames

4. Highlight purple frame, with magic wand tool click into it, selection, modify, expand 10px, copy PDS_Girlie Girl- paper9.jpg, paste as new layer, selection invert, press delete, select none, arrange beneath purple frame

5. Highlight purple frame again, open PDS_GG- element20.png, resize 50%, copy and paste as new layer, move it to the left and a little up, add Dropshadow 2/2/25/2 #000000 (Shadow on new layer checked), highlight curtain, select all, selection float, selection defloat, highlight shadow layer, press delete, select none, highlight curtain, merge down, duplicate layer, image mirror

6. Open PDS_GG- element44.png, copy and paste as new layer, move it down to the right, place it below the lower right corner of the frame, add Dropshadow (Shadow on new layer not checked), open PDS_GG- element45.png, copy and paste as new layer, image mirror, move it down to the left, place it below the lower left corner of the frame, add Dropshadow -2/-2/25/2 #000000, arrange this layer above the group layer

7. Highlight top layer, open PDS_GG- element23.png, resize 50%, copy and paste as new layer, free rotate 45 degrees right, sharpen, move up to the left corner of the frame, add Dropshadow 2/2/25/2 #000000, open PDS_GG- element30.png, resize 30%, copy and paste as new layer, image mirror, move it up into the right corner of the frame, add Dropshadow, open PDS_GG- element37.png, resize 50%, copy and paste as new layer, free rotate 25 degrees right, sharpen, move it up to the right, place on the flower, add Dropshadow, open PDS_GG- element12.png, resize 20%, copy and paste as new layer, image mirror, sharpen, move it up to the right, place it on the bow, add Dropshadow

8. Open PDS_GG- element19.png, resize 80%, copy and paste as new layer, move down, add Dropshadow, open PDS_GG- element46.png, resize 35%, copy and paste as new layer, free rotate 20 degrees right, move down, add Dropshadow, open PDS_GG- element38.png, resize 40%, copy and paste as new layer, move down to the left corner of the frame, add Dropshadow, open PDS_GG- element43.png, resize 40%, copy and paste as new layer, move it down, add Dropshadow

9. Highlight purple flower layer, open PDS_GG- element4.png, resize 30%, copy and paste as new layer, move down, add Dropshadow, open PDS_GG- element5.png, resize 20%, copy and paste as new layer, move down, add Dropshadow, open PDS_GG- element3.png, resize 40%, copy and paste as new layer, free rotate 80 degrees left, move down, add Dropshadow, open PDS_GG- element2.png, resize 45%, copy and paste as new layer, free rotate 12 degrees left, move down, add Dropshadow

10. Open PDS_GG- element42.png, resize 75%, copy and paste as new layer, free rotate 10 degrees right, sharpen, add Dropshadow, move it down, arrange this layer below the purple/beige wrap layer, with freehand selection tool only select the blossom, promote to layer, on original layer press delete, select none, arrange blossom above the wrap

Now open your tube, copy and paste as new layer, resize if needed, place as you wish, add Dropshadow! You can write down your name and/or text now! Add copyright information and save your tag as .png or .jpg!

Hope you enjoyed the tut! Have fun!

Tutorial "Love My Paperboat"

This tutorial was written by me on 13th May 2010. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: "Rain Drops" Scrapkit by PolkaDotScraps, which you can purchase at Twilight Scraps, a cute tube, I am using the adorable artwork of PinUpToons, which you can purchase at CILM and WSL_Mask141.jpg by Chelle

1. Open mask in PSP, open a new transparent canvas 650x650px, flood fill with white, add new layer, select all, open PDS_RD- paper9.jpg, copy and paste into selection, select none, layers - new masklayer - from image, load WSL_Mask141.jpg, source luminance checked, merge group, resize 110% (resize all layers not checked)

2. Open PDS_RD- element18.png, resize 575px, copy and paste as new layer, add Dropshadow 1/1/30/3 #000000, open PDS_RD- frame7.png, resize 500px, copy and paste as new layer, add Dropshadow, with magic wand tool click outside the frame, selection invert, selection, modify, contract 4px, open PDS_RD- paper7.jpg, copy and paste as new layer, selection invert, press delete, select none, arrange beneath frame

3. Open PDS_RD- element49.png, custom selection - Top 0/Left 0/Bottom 150/Right 191, press delete, select none, copy and paste as new layer, free rotate 90 degrees left, image flip, move it down and a very little to the left, duplicate layer, image mirror, image flip, merge down, add Dropshadow 1/1/30/3 #000000, arrange this layer above the wire

4. Open PDS_RD- element19.png, resize 300px (Height), copy and paste as new layer, move it down to the left, duplicate layer, image mirror, image flip, merge down, add Dropshadow, arrange layer above the ribbons

5. Highlight top layer, open PDS_RD- element44.png, resize 350px, copy and paste as new layer, image mirror, free rotate 35 degrees left, move it up to the left, place it on the wooden frame, duplicate layer, image mirror, image flip, merge down, add Dropshadow

6. Open PDS_RD- element47.png, resize 150px, copy and paste as new layer, move it down, add Dropshadow, open PDS_RD- element46.png, resize 150px, copy and paste as new layer, move it down and a little to the right, arrange, move down, add Dropshadow, highlight top layer, open PDS_RD- element5.png, resize 250px, copy and paste as new layer, image mirror, move down to the left, place it next to the flower, add Dropshadow

7. Open PDS_RD- element26.png, resize 150px, copy and paste as new layer, move it up to the right, add Dropshadow, open PDS_RD- element36.png, resize 250px (Height), with freehand selection tool remove the stem of the windmill, copy and paste as new layer, place it on the left side of the frame, add Dropshadow

8. Highlight the upper leaves layer, open your tube, copy and paste as new layer, resize if needed, image mirror if needed, place as you wish, add Dropshadow 1/1/30/3 #000000

If you want you can write down your name and/or text. Please add copyright information and save your tag as .png or .jpg! Please have fun!

Tutorial "In Pain"

This tutorial was written by me on 5th February 2010. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: PTU tagger size kit "Lonesome" by PolkaDotScraps, which you can purchase on Twilight Scraps, a lovely tube, I am using the beautiful artwork of Zindy Nielsen, which you can purchase at Zindy Zone

1. Open a new canvas 650x650px, flood fill with white, open PDS_L- element45.png, copy and paste as new layer, add Dropshadow 1/1/40/4 #000000, open PDS_L- element30.png, copy and paste as new layer, free rotate 10 degrees right, add Dropshadow

2. Open PDS_L- element12.png, copy and paste as new layer, image mirror, move it up and a little to the right, duplicate layer, image mirror, image flip, merge down, arrange - move down, arrange it above the background layer, duplicate layer, set the opacity of the duplicated one to 50

3. Open PDS_L- element14.png, resize 70%, copy and paste as new layer, move it down, arrange this layer below the notepaper, duplicate layer, image mirror, image flip, merge down, add Dropshadow1/1/40/2 #000000

4. Highlight top layer, open PDS_L- frame4.png, resize 70%, copy and paste as new layer, free rotate 5 degrees left, add Dropshadow 1/1/40/4 #000000, with the magic wand tool click into the frame, selection, modify, expand 10px, open PDS_L- paper3.jpg, copy and paste as new layer, selection invert, press delete, leave inverted selection intact, arrange paper under the frame layer and stay on the paper layer, open your tube, free rotate 45 degrees right, copy and paste as new layer, fit into the frame as you wish, press delete, select none, add Dropshadow 1/1/40/4 #000000 to tube layer

5. Highlight frame layer, open PDS_L- element33.png, resize 73%, copy and paste as new layer, free rotate 5 degrees left, place it on the right side of the frame, add Dropshadow 1/1/40/2 #000000

6. Open PDS_L- element1.png, resize 35%, copy and paste as new layer, free rotate 18 degrees right, adjust - sharpen, move it down into the right corner of the frame, add Dropshadow, open PDS_L- element26.png, resize 45%, copy and paste as new layer, move it down, place it on the left side of the envelope, add Dropshadow

7. Open PDS_L- element10.png, resize 50%, copy and paste as new layer, free rotate 90 degrees left, move it down, place it between the two elements there, open PDS_L- element22.png, resize 70%, copy and paste as new layer, move it down, add Dropshadow 1/1/40/2 #000000

8. Open PDS_L- element39.png and PDS_L- element40.png, resize both 35%, copy and paste as new layers, move them up into the left upper corner of the frame, add Dropshadow to both

9. Open PDS_L- element31.png, copy and paste as new layer, move it to the left and a little down, add Dropshadow, arrange this layer above the notepaper

10. Open top layer again and write down your name and/or text! Please add copyright information and save your tag as .png or .jpg! Hope you enjoyed the tutorial!

Tutorial "She's so...."

This tutorial was written by me on 30th December 2009. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: PTU tagger size kit "My December" by PolkaDotScraps, which you can purchase on Twilight Scraps, a funny tube, I am using the adorable artwork of Elias Chatzoudis, which you can purchase on MyPSPTubes and template #106 by Rachel

1. Open template in PSP, with Shift D make a copy, close the original, delete layers ©INFO, Teasing, Enticing, and Brush, add new rasterlayer, arrange, send to bottom, flood fill with white

2. Highlight BlackRectangle, select all, selection float, selection defloat, delete layer, open PDS_MD- paper2.jpg, rotate 90 degrees left, copy and paste as new layer, move it so that there is no more snowflake on the paper into the selection, selection invert, press delete, select none, duplicate layer, image mirror, merge down, add Dropshadow 0/0/50/5 #000000, add Dropshadow 2/2/25/2 #000000

3. Highlight PinkStrip, select all, selection float, selection defloat, delete layer, open PDS_MD- paper1.jpg, rotate 90 degrees left, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow 0/0/50/5 #000000, duplicate layer, image mirror

4. Highlight top layer, open PDS_MD- element48.png, resize 72%, copy and paste as new layer, free rotate 90 degrees right and move it to the right, place it on the strip, add Dropshadow 0/0/50/2 #000000, duplicate layer, image mirror

5. Highlight WhiteFrame, cut, paste as new layer, select all, selection float, selection defloat, delete layer, open PDS_MD- paper1.jpg (not rotated), copy and paste as new layer, selection invert, press delete, select none, add Dropshadow 2/2/25/2 #000000

6. Highlight Gradient Background, cut, paste as new layer, select all, selection float, selection defloat, delete layer, open PDS_MD- paper11.jpg, copy and paste as new layer, selection invert, press delete, select none

7. Duplicate rectangle layer, highlight the lower (original) rectangle layer, resize 117% (resize all layers not checked), Effects - Texture Effects - Glass Mosaic, set the opacity to 60 and arrange this layer above the white background layer
8. Highlight GlitterDots, cut, paste as new layer, select all, selection float, selection defloat, delete layer, open PDS_MD- glitter1.png, resize 50%, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow 2/2/25/2 #000000

9. Open PDS_MD- element21.png, resize 45%, copy and paste as new layer, free rotate 10 degrees left, move it to the left as you can see on my preview, arrange this layer above the red rectangle, duplicate layer, Effects - Image Effects - Offset 60/0, merge down, duplicate layer, image mirror, merge down, duplicate layer, image flip, merge down, add Dropshadow 2/2/25/2 #00000010. Highlight top layer, open PDS_MD- element18.png, resize 78%, copy and paste as new layer, free rotate 90 degrees right, move it to the left and a little up and place it as you can see on my preview, draw a selection as you can see on my preview, press delete, select none
Duplicate layer, image mirror, image flip, add Dropshadow 2/2/25/2 #000000 to both strings

11. Open PDS_MD- element24.png, resize 40%, copy and paste as new layer, free rotate 25 degrees left, move it to the right, duplicate layer, image mirror, resize 85% (resize all layers not checked), move it a little up, add Dropshadow 2/2/25/2 #000000 to both butterflies

12. Highlight SSFText, move it a little to the right, arrange - send to top and edit the wordart as you would like to, open your tube, copy and paste as new layer, resize if needed, place as you wish and add Dropshadow of your choice

At the end I duplicated the Brush Stars layer, image mirror, image flip but you don't have to do that if your don't like to!

Please add copyright information and save your tag as .png or .jpg! Hope you enjoyed the tutorial! Have fun!

Tutorial "My Everything"

This tutorial was written by me on 28th December 2009. It was done with PSP9 but it might work with other versions, too. This tutorial is copyrighted to me, any resemblance is purely coincidental and not intentional!

You need: PTU tagger size kit "My Everything" by PolkaDotScraps, which you can purchase on Twilight Scraps, a beautiful tube, I am using the gorgeous artwork of Ismael Rac, which you can purchase on ArtisticMindsInc, template #306 by DivineIntentionz and masks gemsmask37.jpg and gemsmask-41.jpg by Gems Taggin' Scraps, Effects - Penta.Com - Color Dots

Supplies Download

1. Open masks and template in PSP, with Shift D make a copy of the template, close the original, delete all layers except circle, dotted circle, glittered circle, small circle and medium circle, Image - Canvas Size - Width 668px/Height 600px - Placement Center, add new rasterlayer, arrange - send to bottom, flood fill with white

2. Select all, add new raster layer, open PDS_ME- paper16.jpg, copy and paste into selection, select none, layers - new mask layer - from image, load gemsmask-41.jpg, source luminance checked, merge group, move it down, duplicate layer, image mirror, image flip, merge down, set the opacity to 75

3. Select all, add new raster layer, paste paper PDS_ME- paper16.jpg into selection again, select none, layers, new mask layer, from image, load gemsmask37.jpg, source luminance checked, merge group

4. Custom Selection, Up 0/Left 334/Down 600/Right 668, press delete, select none, duplicate layer, image mirror, image flip, merge down

5. Highlight circle, select all, selection float, selection defloat, delete layer, open PDS_ME- paper14.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow 3/3/35/3 #000000

6. Highlight dotted circle, select all, selection float, selection defloat, delete layer, open PDS_ME- paper4.jpg, copy and paste as new layer, selection invert, press delete, select none, add Dropshadow

7. Highlight medium circle, select all, selection float, selection defloat, delete layer, copy paper PDS_ME- paper16.jpg, paste as new layer, selection invert, press delete, select none, duplicate layer, image mirror, image flip, merge down, Effects - Penta.Com - Color Dot - Value 90/Distance 6/Color R,G,B = 255, add Dropshadow 3/3/35/3 #000000

8. Highlight glittered circle, select all, selection float, selection defloat, delete layer, copy paper PDS_ME- paper16.jpg, paste as new layer, selection invert, press delete, select none, duplicate layer, image mirror, image flip, merge down, add Dropshadow

9. Highlight small circle, select all, selection float, selection defloat, delete layer, open PDS_ME- paper14.jpg, copy and paste as new layer, selection invert, press delete, select none, duplicate layer, image mirror, image flip, merge down

10. Highlight top layer, open PDS_ME- frame3.png, resize 85%, copy and paste as new layer, with the magic wand tool click into it, selection, modify, expand 7px, open PDS_ME- paper15.jpg, copy and paste as new layer, selection invert, press delete, select none, arrange paper layer under the frame layer, highlight frame layer, add Dropshadow 3/3/35/3 #000000

11. Open PDS_ME- element42.png, resize 80%, rotate 90 degrees right, copy and paste as new layer, move it to the right, duplicate layer, image mirror, image flip, merge down, add Dropshadow12. Open PDS_ME- element11.png, resize 50%, copy and paste as new layer, free rotate 100 degrees left, move it onto the left upper corner of the frame, add Dropshadow

13. Open PDS_ME- element10.png, resize 50%, copy and paste as new layer, image mirror, move it up to the left, place it on element11, add Dropshadow

14. Open PDS_ME- element5.png, resize 65%, copy and paste as new layer, image mirror, free rotate 50 degrees right, move it to the left and a little down, add Dropshadow, open PDS_ME- element6.png, resize 65%, copy and paste as new layer, free rotate 50 degrees left, move it to the left and a little more down than the other heart, arrange this heart under the pink one, add Dropshadow15. Highlight top layer, open PDS_ME- element39.png, resize 50%, copy and paste as new layer, move it down to the left, add Dropshadow, open PDS_ME- element8.png, resize 40%, copy and paste as new layer, free rotate 15 degrees left, add Dropshadow, move it down to the left, place it as you can see on my preview, highlight envelope layer and with your freehand selection tool draw a selection around the knot of the bow, promote to layer, select none, arrange the promoted layer above the key layer16. Open PDS_ME- element31.png, resize 50%, copy and paste as new layer, image mirror, move to the right, with the magic wand tool click into all empty parts of it, selection, modify, expand 8px, open PDS_ME- paper14.jpg, copy and paste as new layer, selection invert, press delete, select none, arrange - move down, highlight heart element, add Dropshadow

17. Open PDS_ME- element46.png, resize 40%, copy and paste as new layer, image mirror, move it to the right and a little up, add Dropshadow

18. Open PDS_ME- element28.png, resize 40%, copy and paste as new layer, move it up and place it on top of the right ribbon, add Dropshadow, duplicate layer, move it down and place it on the right lower corner of the frame

19. Now open your tube, copy and paste as new layer, resize if needed, add Dropshadow 3/3/35/3 #000000 and place as you wish

You can write down your name and/or text now, add copyright information and save your tag as .png or .jpg! Have fun, I hope you enjoyed the tut!